Top » Catalog » Standard and RACE Clip On Handle »

$320.00

41mm low riser clip ons

41mm low riser clip ons
These clip ons are Tig Welded from 304ss . Bars are 270mm long , supplied with hollow ends , alloy end plugs can be purchased seperatley. Or M6 bosses can be welded into the ends at $20 extra. Note: any size clip on can be manufactured just choose the multi size order and enter the size you wish on the comments section.
Reviews
Categories
Axle Sliders (49)
BMW Speciality Tools (6)
Brembo master cylinders (2)
Ducati Parts
Ducati Specialty TOOLS (38)
Fairing/Tacho Mounts/Subframes (7)
Frames and Swingarms & Ali Tanks (11)
Handlebars (8)
Lowering Kits (22)
MV Agusta TOOLS (1)
Rapidart replacement footpegs (8)
Sharks Fin (2)
Speciality Tools Universal (38)
Triumph Specialty Tools (3)
Tyre Warmers (1)
TOURIN BARS High Risers (87)
Standard and RACE Clip On Handle (58)
Rearsets (102)
Skid Knobs (141)
Brake Rotors (7)
Stands (12)
Exhaust Systems (6)
Steering Dampers & clamps (18)
Suspension-> (4)
Brake lines & Fittings (24)
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
What's New?
Husqvarna Vitpilen 701 Tourin Bars
Husqvarna Vitpilen 701 Tourin Bars
$439.00
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
We Accept
Shopping Cart
1 x Velcro Reusable Cable Tie Set
1 x Kawasaki ZX10 06-07 Fixed Rearsets
1 x Rear Wheel Nut Socket 46mm
2 x Ducati 600/750/900SS 91-98 Fixed Rearsets
2 x Single banjo with bleed nipple M10x1.0
1 x Kawasaki ZX10 08-10 Clip ons
1 x Yamaha V-MAX Highway pegs
1 x Calliper Piston Puller
2 x Brake Light Sensor 3/8 x 24 (UNF)
1 x F1E Bead Breaker
1 x Spoke Head Driver Set
2 x M10X1.0 Brake light banjo
1 x Suzuki GSXR750 (K1-K4) Fixed Rearsets
1 x Ducati 916 Clip Ons
2 x Short Straight Banjo
1 x Kawasaki ZX6 (01-02) Clip Ons
1 x Tappet Adjuster Tool Set
1 x Timing Pully Nut Holding Tool to suit most belt driven Ducs
1 x Suzuki GSXR600 (97-99) Fixed Rearsets
1 x Kawasaki ZX6 (95-97) Clip Ons
1 x 25 degree 7/16 Banjo fitting
1 x Triumph TT600 Clip Ons
2 x Banjo Bolt M10 x 1.0 single
1 x Honda CBR600 F4 F4i(99-05) Adjustable Rearsets
1 x Suzuki GSXR 1000 (K1-K4) Fixed Rearsets
2 x Double Banjo Bolt M10x1.25
2 x Straight Banjo
2 x 90 degree banjo
1 x Rear Chain Adjuster Tool 1098/1198
1 x Kawasaki ER6 Race Clip Ons
1 x Aprilia RS 250 Fixed Rearsets
1 x 45 degree banjo
1 x Single banjo with bleed nipple M10 x1.25
1 x Suzuki GSXR750 (97-99) Fixed Rearsets
1 x Primary Transmission Lock Nut Driver
1 x Rocker pin puller tool for all 2 valve Ducati MH900E, Hypermotar
1 x 25 Degree Banjo
1 x Brake and Clutch Cable Lubing Tool
1 x Inner Cable Wire Cutters
2 x Standard 75mm footpeg for adjustable rearsets
1 x Fly Wheel Holder
1 x Double banjo M10 x 1.0 with bleed nipple
1 x Ducati 996/748/916 Reverse Change Gear Lever
1 x Honda CBR600 (95-98) Fixed Rearsets
1 x Side banjo fitting
1 x Ducati TT2 Fixed Rearsets$NZ $250 per pair + mount plates
2 x Copper washer
1 x Kawasaki ZX6RR 03-06
1 x Timing Belt Pully Holding Tool
1 x Primary Gear Holder Tool for 4 Valves
1 x Brake line clamp
1 x Circlip Pullers
1 x SuzukiGSXR600 (97-99) Clip Ons
2 x Brake light Sensor 7/16 x 24 (UNF)
1 x Multi sizes 28 to 46mm Butt-welded Clipons
1 x Brembo RCS19 Racing m/cyl
1 x Norton Manx Clip Ons
1 x Yamaha R6 99-05 Clip Ons
1 x MV Augusta Axle Nut Set
1 x 1L Slim Funnel
1 x BH Global braided line
2 x Banjo bolt M10x 1.25 single
1 x Lock Wire
1 x Quad Inner Tie Rod Puller
1 x Suzuki SV650 Fixed Rearsets
1 x Seal & O_Ring Remover Tool Set
1 x Kawasaki ZX7 (96-00) Clip Ons
1 x Special clutch locking tool
1 x Primary Gear Holder Tool for 2 Valves
1 x Foldable Silicon Funnel
1 x Axle Hex Tool
1 x Ducati 600ss/750ss/900ss Reverse Change Gear Lever
1 x Exhaust flange nut driver. All Bevel Drive Ducati
1 x TEE fitting
1 x Double Banjo Bolt M10x1
1 x Feul Siphon Pump
1 x Ducati Timing Tool Set
1 x Double banjo M10 x1.25 with bleed nipple
1 x Yamaha R6 06 Fixed Rearsets
1 x Primary Gear Puller
1 x Rocker Holder and Spring/Shim Adjuster Tool
1 x Front Axle Alignment Tools
1 x Kawasaki ZXR400 Clip Ons
$15,218.45
Manufacturer Info
Universal Parts
- Other products
Notifications
NotificationsNotify me of updates to 41mm low riser clip ons
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Reviews
Write ReviewWrite a review on this product!

Copyright © 2024 F1E Motorcyle Works
Powered by osCommerce

osCommerce