Axle Sliders

Aprilia RSV 1000 -04-08 Front Axle Slider

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter of the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rod. One end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Aprilia

Part No. 380

Aprilia RSV 1000 04-08 Front and Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter of the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rod. One end is locktited and the other screws into a ss threaded insert for strength and longevity. ( Price excludes Skid Knobs as shown in picture)

$319.00 NZD

Manufacturer. Aprilia

Part No. 368

Aprilia RSV1000 04-08 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter of the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rod. One end is locktited and the other screws into a ss threaded insert for strength and longevity. (Excludes Skid Knobs as shown in picture)

$169.00 NZD

Manufacturer. Aprilia

Part No. 369

Ducati 1198S - 1098S Front axle sliders

These Rapid Art axle sliders are secured to each other with a solid 9.5mm ali tie rod though the axle. The right side simply un screws via the heli coiled thread the other end of the tie rod is screwed and loctied into the left hand slider.

$169.00 NZD

Manufacturer. Ducati

Part No. 502

Ducati 748 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Ducati

Part No. 399

Ducati 916 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Ducati

Part No. 400

Ducati M1100 796 rear axle slider

rear cush drive / hub and swingarm protection , secured with a SS through bolt simple to remove for wheel removal.

$149.00 NZD

Manufacturer. Ducati

Part No. 563

Ducati M1100 front axle sliders

These Rapid Art axle sliders are secured through the axle with a 3/8 solid ali tie rod with a recoil insert thread , simple to remove with a tidy finish , custom made to fit securely into end of axle and around the nut.

$149.00 NZD

Manufacturer. Ducati

Part No. 567

Honda CBR1000RR 08-13 Front & Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$319.00 NZD

Manufacturer. Honda

Part No. 432

Honda CBR1000RR 08-13 Front axle sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Honda

Part No. 430

Honda CBR1000rr 08-13 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Honda

Part No. 431

Honda CBR600RR 07-13 Front & Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$319.00 NZD

Manufacturer. Honda

Part No. 436

Honda CBR600RR 07-13 Front Axle Slider

Honda CBR600RR 07-09 Front Axle Sliders. These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Honda

Part No. 404

Honda CBR600RR 07-13 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Honda

Part No. 435

Husky Nuda 900 & 900R Front axle sliders

These Rapid art axle sliders screw to each other through the axle via a 9.5mm soild ali tie rod thread is recoiled for strength . Removal is quick . Can be purchased at a discount if both front and rear sliders brought together at $319.00 the pair.

$169.00 NZD

Manufacturer. Husqvarna

Part No. 527

Husqvarna Nuda 900 & 900R Rear axle sliders

These Rapid art axle sliders are secured via a 8mm stainless steel rod through the axle and have a washer and nut on each end. Threaded end of axle is 7.5mm inside dimension by only 30-40mm deep so needs to be drilled out with a 8mm drill to fit the tie rod through. Both front and rear sliders can be purchased together for $319.00

$169.00 NZD

Manufacturer. Husqvarna

Part No. 528

Kawasaki ZX10R -08-10 Front and Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$319.00 NZD

Manufacturer. Kawasaki

Part No. 398

Kawasaki ZX10R -08-10 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Kawasaki

Part No. 396

Kawasaki ZX10R -08-10 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Kawasaki

Part No. 397

Kawasaki ZX10R 04-07 Front and Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$319.00 NZD

Manufacturer. Kawasaki

Part No. 395

Kawasaki ZX10R 04-07 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Kawasaki

Part No. 393

Kawasaki ZX10R 04-07 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Kawasaki

Part No. 394

Kawasaki ZX10R 2011 Front axle sliders

These Rapid Art axle sliders screw to each other via a solid 3/8 ali tie rod through the hollow axle, slider has a ss thread insert for thread longivity and quick removal.

$169.00 NZD

Manufacturer. Kawasaki

Part No. 511

Kawasaki ZX14 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Kawasaki

Part No. 402

Kawasaki ZX14 Rear Axle Sliders/Race Stand Lugs

aluminium black anodised M10 race stand lugs with UHMPWE sliders bolted to the outside for function + protection.

$169.00 NZD

Manufacturer. Kawasaki

Part No. 403

Moto Morini Corsaro 1200 Front and Rear axle sliders

Both front and rear axle sliders for the Moto Morini see seperate listing for pictures and desciptions.

$319.00 NZD

Manufacturer. Moto Morini

Part No. 514

Moto Morini Corsaro 1200 Front axle sliders

These axle sliders are designed specifically for the Moto Morini front end they are held in place by a 6mm SS tie rod with a nut on one end for removal.Both front and rear sliders can be purchased together for a discounted price - see other listing.

$169.00 NZD

Manufacturer. Moto Morini

Part No. 512

Moto Morini Corsaro 1200 Rear axle sliders

These Axle sliders a designed specifically for the moto morini rear axle they are held together via a 3/8 solid ali tie rod through the centre of the axle. One end is screwed and loctited to the slider the other end has a SS recoil inserted for strength and longevity of the thread. Both front and rear can be purchased together for a discounted price - see othet listing.

$169.00 NZD

Manufacturer. Not categoriesed

Part No. 513

Suzuki GSXR1000 K7-K9 Front & Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$319.00 NZD

Manufacturer. Suzuki

Part No. 439

Suzuki GSXR1000 K7-K9 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Suzuki

Part No. 437

Suzuki GSXR1000 K7-K9 Rear axle sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Suzuki

Part No. 438

Suzuki GSXR6 K6-K9 Front and Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$319.00 NZD

Manufacturer. Suzuki

Part No. 389

Suzuki GSXR6 K6-K9 Front Axle Slider

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Suzuki

Part No. 387

Suzuki GSXR6 K6-K9 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Suzuki

Part No. 388

Suzuki SV650 2017 fnt axle sliders and axle

Phillip Cho 1 off order to supply drilled and tapped new axle and sliders inc tracked freight to USA ( NOTE PICTURE IS ACTUALLY OF THE REAR SLIDERS )

$318.00 NZD

Manufacturer. Suzuki

Part No. 287

Suzuki SV650 Front and Rear Axle Sliders

These rear axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is loctited and the other screws into a ss threaded insert for strength and longevity. Front sliders are bolted to the solid axle the axle needs to be drill and tapped M8 each end . We can do this for $20 inc freight back if you send it to us.

$269.00 NZD

Manufacturer. Suzuki

Part No. 392

Suzuki SV650 Front Axle Sliders

These axle sliders bolt directly into each end of the axle, each end of the axle must be drilled and tapped M8, capscrews are provided . We can drill and tap your axle at a cost of $20 inc the freight back if you send it to us.

$119.00 NZD

Manufacturer. Suzuki

Part No. 390

Suzuki SV650 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Suzuki

Part No. 391

Triumph 675 Front & Rear Axle Sliders

Pair

$319.00 NZD

Manufacturer. Triumph

Part No. 451

Triumph 675 Front Axle Sliders

$169.00 NZD

Manufacturer. Triumph

Part No. 449

Triumph 675 Rear Axle Sliders

$169.00 NZD

Manufacturer. Triumph

Part No. 450

Triumph Speed Triple Rear Swingarm Protection 05-09

Triumph Speed Triple rear swingarm slider, suit models from 05-09.

$199.00 NZD

Manufacturer. Triumph

Part No. 455

Yamaha FZ6 05-08 Front & Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$319.00 NZD

Manufacturer. Yamaha

Part No. 386

Yamaha FZ6 05-08 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Yamaha

Part No. 381

Yamaha FZ6 05-08 Rear Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Yamaha

Part No. 385

Yamaha MT 09 Front Axle Sliders

These axle sliders secure to each other with a 3/8 solid ali tie rod . I 10mm drill must be drilled through the small end of the axle ( 22mm deep it is just over 9mm id at the moment) which we can do here at F1E at no charge or a 10mm drill can be supplied if requested. The existing hole in the axle is only just under this size from the factory so strength is not compromised.

$149.00 NZD

Manufacturer. Yamaha

Part No. 547

Yamaha MT 09 Rear Axle sliders

These axle sliders are secured to each other via a 3/8 ali solid rod which is fixed into one end and screws into the other with a Stainless Steel thread insert so are simple to remove for chain adjustment.

$149.00 NZD

Manufacturer. Yamaha

Part No. 546

Yamaha R1 04-05 Swingarm Sliders

These mini Skid Knobs bolt into the race stand lug mounts on the rear of the swingarm for protection , but cannot be utalised to suit race stand v-cursors as they are only attched via a M6 capscrew and the extra leverage fron having them to long with tear the thread out .

$89.00 NZD

Manufacturer. Yamaha

Part No. 251

YamahaR1 04-08 Front Axle Sliders

These axle sliders fit over the nuts or into the large allen head hole on the axle so the outside diameter od the slider is supported against the axle block or fork leg to give the best rigidity. They are tied together with a 3/8 solid aluminium tie rid, one end is locktited and the other screws into a ss threaded insert for strength and longevity.

$169.00 NZD

Manufacturer. Yamaha

Part No. 401